Entropic Echo

主题

OpenClaw 配置 ​

使用 CC Switch 管理密钥，再按 provider 类型填写协议、Base URL 与 User-Agent。

开始之前 ​

先在 CC Switch 统一配置 中添加 Entropic Echo 配置并确认 API Key 可用。OpenClaw 作为外接客户端调用时，还需要为每个 provider 单独设置协议和 User-Agent。

配置 API provider ​

无论是否通过 CC Switch，只要 OpenClaw 作为外接客户端调用，就要注意以下几点：

  • 同一个 OpenClaw 可以同时接 Claude 和 Codex
  • 不同 provider 要分别填写对应 User-Agent
  • 不能把 Claude 的 UA 直接复用到 Codex provider 上
  • 国产模型 provider 不建议省略浏览器型 UA

如果你是第一次接 OpenClaw，建议先按这个顺序排：

  1. 先在 CC Switch 统一配置 中确认 Key 可用
  2. 再看 外接兼容与接入说明 确认 Base URL、协议和模型
  3. 最后回到本页填写 OpenClaw provider 细节

如果配置的是 Claude provider ：

  • Base URL ：https://api.entropicecho.com
  • API 协议 ：Anthropic Messages
  • 必须添加 Claude 对应 Headers ：
json
"headers": {
"Authorization": "Bearer sk-xxx",
"User-Agent": "claude-cli/2.0.76 (external, cli)"
}

如果配置的是 Codex provider ：

  • Base URL ：https://api.entropicecho.com/v1
  • API 协议 ：OpenAI Responses
  • 必须添加 Codex 对应 Headers ：
json
"headers": {
"Authorization": "Bearer sk-xxx",
"User-Agent": "codex_cli_rs/0.77.0 (Windows 10.0.26100; x86_64) WindowsTerminal"
}

如果配置的是 国产模型 provider ：

  • 模型 ID ：从 模型广场 复制对应模型 ID
  • Headers ：使用浏览器型 User-Agent
json
"headers": {
"Authorization": "Bearer sk-xxx",
"User-Agent": "Mozilla/5.0 (Windows NT 10.0; Win64; x64; rv:149.0) Gecko/20100101 Firefox/149.0"
}

无论是 Claude provider、Codex provider 还是国产模型 provider，缺少各自对应 UA 时，都可能报 403 block 或 403 Forbidden。配置模型时，从模型广场复制模型 ID 填入即可。

外接场景的 UA 规则见 外接调用 User-Agent 说明。

如果你还要接 JetBrains、Trae 等其他外接客户端，可统一从 外接兼容与接入说明 进入，再按客户端页面分别落地。

完整配置 JSON 参考 ​

展开查看

json
{
"agents": {
"defaults": {
"compaction": {
"mode": "safeguard"
},
"maxConcurrent": 4,
"model": {
"primary": "entropicecho-codex/gpt-5.6"
},
"subagents": {
"maxConcurrent": 8
},
"workspace": "C:\\\\Users\\\\<USERNAME>\\\\.openclaw\\\\workspace"
},
"list": [
{
"agentDir": "C:\\\\Users\\\\<USERNAME>\\\\.openclaw\\\\agents\\\\main\\\\agent",
"id": "main",
"name": "main",
"workspace": "C:\\\\Users\\\\<USERNAME>\\\\.openclaw\\\\workspace"
}
]
},
"channels": {
"feishu": {
"appId": "<YOUR_FEISHU_APP_ID>",
"appSecret": "<YOUR_FEISHU_APP_SECRET>",
"domain": "feishu",
"enabled": true,
"groupPolicy": "disabled"
}
},
"commands": {
"native": "auto",
"nativeSkills": "auto",
"ownerDisplay": "raw",
"restart": true
},
"gateway": {
"auth": {
"mode": "token",
"token": "<YOUR_GATEWAY_TOKEN>"
},
"bind": "loopback",
"mode": "local",
"nodes": {
"denyCommands": [
"camera.snap",
"camera.clip",
"screen.record",
"calendar.add",
"contacts.add",
"reminders.add"
]
},
"port": 18789,
"tailscale": {
"mode": "off",
"resetOnExit": false
}
},
"hooks": {
"internal": {
"enabled": true,
"entries": {
"session-memory": {
"enabled": true
}
}
}
},
"messages": {
"ackReactionScope": "group-mentions"
},
"models": {
"mode": "merge",
"providers": {
"entropicecho-claude": {
"api": "anthropic-messages",
"apiKey": "sk-xxx",
"baseUrl": "https://api.entropicecho.com",
"headers": {
"Authorization": "Bearer sk-xxx",
"User-Agent": "claude-cli/2.0.76 (external, cli)"
},
"models": [
{
"contextWindow": 200000,
"cost": { "cacheRead": 0, "cacheWrite": 0, "input": 0, "output": 0 },
"id": "claude-opus-4-5-20251101",
"maxTokens": 32000,
"name": "claude-opus-4-5"
},
{ "id": "claude-haiku-4-5-20251001", "name": "claude-haiku-4-5" },
{ "id": "claude-opus-4-6", "name": "claude-opus-4-6" },
{ "id": "claude-sonnet-4-5-20250929", "name": "claude-sonnet-4-5" },
{ "id": "claude-sonnet-4-6", "name": "claude-sonnet-4-6" }
]
},
"entropicecho-codex": {
"api": "openai-responses",
"apiKey": "sk-xxx",
"baseUrl": "https://api.entropicecho.com/v1",
"headers": {
"Authorization": "Bearer sk-xxx",
"User-Agent": "codex_cli_rs/0.77.0 (Windows 10.0.26100; x86_64) WindowsTerminal"
},
"models": [
{
"contextWindow": 200000,
"cost": { "cacheRead": 0, "cacheWrite": 0, "input": 0, "output": 0 },
"id": "gpt-5.6",
"maxTokens": 32000,
"name": "gpt-5.6"
},
{ "id": "gpt-5.5", "name": "gpt-5.5" },
{ "id": "gpt-5.4", "name": "gpt-5.4" },
{ "id": "gpt-5.4-mini", "name": "gpt-5.4-mini" }
]
}
}
},
"plugins": {
"entries": {
"feishu": { "enabled": true }
}
},
"session": {
"dmScope": "per-channel-peer"
},
"tools": {
"profile": "coding"
}
}